Outbound call campaign benchmarks differ by campaign type, so no single number fits every campaign. In a consumer survey, 86% of unknown calls go unanswered. In 2018, phone polls finished about 6% of numbers dialled. One small lender test below is a worked example, not a benchmark.
Define the three rates before you compare
Every benchmark is a fraction, so check what sits underneath it. Three rates matter:
- Answer rate: calls answered divided by calls dialled.
- Completion rate: conversations or surveys finished divided by calls answered.
- Conversion rate: goal met divided by calls answered. Some sources divide by calls dialled instead, which gives a much smaller number.
Three things change the answer rate before any script runs. Voicemail is not an answer, so strip it out of the count. A call where only the AI spoke and no person replied is not a real contact, and Insight7 Voice, in beta, does not count those as reached. A carrier's temporary refusal is not the customer's choice, so it should not use up a retry. Insight7 Voice, in beta, handles it that way.
Campaign type matters too. Insight7's campaign setup, in beta, offers customer survey, lead follow-up, cold outreach and win-back as separate types. Compare each type only with its own kind.
Rule: always state the denominator when you quote a benchmark. A "20% conversion" from answered calls and one from dialled calls are different results.
Answer rate benchmarks by campaign type
Cold and win-back lists answer least, because the caller is unknown. Hiya's State of the Call 2026 report is a survey of more than 12,000 consumers in six countries. It says 86% of unknown calls go unanswered. That is a consumer survey result, not a measured campaign rate. Roughly 14% answered is our own subtraction from it. Use it as a rough planning range for cold outreach and for win-back lists where the customer no longer recognises your number.
| Campaign type | Answer or response benchmark | Source |
|---|---|---|
| Cold outreach and win-back (unknown number) | About 14% answered (derived from a consumer survey) | Hiya, State of the Call 2026 |
| Customer survey by phone | 7% in 2017 and 6% in 2018, completed interviews per number dialled (public-opinion polls) | Pew Research Center |
| Lead follow-up and reminders | No published benchmark found; set it from your own pilot | Not published |
Pew's figures are 2018 public-opinion poll data. They are not a current customer-survey benchmark, so treat them as a dated floor. Pew explains why they are low. Pew points to a surge in automated telemarketing and to spam flagging, because a poll call usually shows up as an unfamiliar number. Your cold campaign faces the same screening.
Reminders and lead follow-up reach people who know you or asked to hear from you. Logic says they should answer more than unknown numbers, but we found no published figure for either type. Set their targets from a short test of your own:
- Pick 200 to 300 contacts per campaign type.
- Hold the script and caller number constant.
- Test two or three call windows.
- Log every attempt, not just the final result.
- Report answer rate per attempt, and the share of contacts who answered at least once. The second is always higher, and a retry rule changes it.
Four things move the result:
- Number type. Mobile and landline pick-up differ, so split your list by line type.
- Caller ID. Carriers and apps label suspected spam before anyone sees your name.
- Local numbers. A familiar area code looks less like a sales call. Insight7 Voice, in beta, can place campaign calls on Nigerian phone numbers through a gateway connected to Nigerian carriers.
- List age. A win-back list is almost always the older one, and older lists answer worse.
Completion and conversion benchmarks by type
Completion and conversion depend on the conversation more than the list. The table below holds the figures we can tie to a source.
| Campaign type | Completion or conversion benchmark | Source |
|---|---|---|
| Customer survey | About 6% response overall in 2018, per number dialled (poll data) | Pew Research Center |
| Sales calls, insurance | Top agents close 65%, bottom agents 0% | |
| Sales calls, manufacturing | Top reps place orders on 29% of calls, bottom reps on 0% |
Pew's rate counts finished interviews against numbers dialled, so it blends answer and completion.
The sales rows show how far one team can spread. A single team average hides a gap between 0% and 65%, so a campaign average can mislead you. Insight7's analysis of 6,209 sales conversations found the top 6.9% of performers asked 37% more questions per call and drove actionable outcomes 45% more often. If your callers differ on those habits, your conversion rate will move more than any list change. In manufacturing, the gap traces to one habit: top reps quote pricing on the call.
Score every call, not a sample, and you can see which behaviours separate your top and bottom callers.
A worked example from one lender
A consumer lender ran a small voice test over 3 rounds. It reached 150 customers, and 130 calls were answered. That is about 87% of the customers reached, far above cold-list norms because these were existing customers. Here is each stage rate:
| Stage | Count | Rate |
|---|---|---|
| Real conversation, per answered call | 66 of 130 | about 51% |
| Loan request, per conversation | 31 of 66 | about 47% |
| Loan request, per answered call | 31 of 130 | about 24% |
This was a small sample from one lender, so read it as a worked example and never as a typical figure.
Two timing findings helped. Mornings and evenings answered better than midday, so the lender moved the campaign start to 8 pm. Redialling also paid off. Three to four attempts was the sweet spot, because many customers only picked up on the second or third try. Set your retry cap with this in mind.
Set your own benchmark and prove it
Run a small pilot per campaign type, then compare it with a control channel. Test two or three call windows and two retry caps. Track answer, completion and conversion per answered call. One bank proposed running SMS and voice AI on the same cross-sell to compare conversion.
What moves your numbers:
- Calling hours and retry count
- Number type and local presence
- Script and opening line
- List age
- Consent and disclosure wording
Disclosure and consent rules differ by region. Check them before you launch:
- EU: Article 50 of the AI Act requires AI systems that talk to people to say so.
- US: the FCC's 2024 declaratory ruling treats AI-generated voices in robocalls as artificial voices under the TCPA, so consent rules apply.
- Colorado: its Chatbot Safety Act takes effect on 1 January 2027 and requires public-facing conversational AI to disclose itself.
Insight7 Voice, in beta, lets a campaign set consent marking, calling hours, retry rules and a do-not-call list. A reviewer can read each transcript. Insight7 can also score every call against a scorecard your team owns.
Related reading: How to Define Success Criteria for an AI Voice Agent Pilot, AI Outbound Campaign Report Template for Sharing Results With Leadership and 12 AI Voice Agent KPIs Growth and Customer Success Teams Should Track.
Questions people also ask
What is a good answer rate for outbound calls?
A good answer rate beats your own baseline for the same campaign type, list and call window. Unknown numbers sit near 14% answered. Known contacts should beat that, so run a two-week test before you set targets.
What is the average cold call conversion rate?
No single average holds, because sources define conversion differently (meeting, sale, interest). Pick one definition and track it. Results also vary widely by rep, as Insight7's insurance data shows.
How many times should you redial an outbound call?
Start with a cap of three to four attempts and test from there. Space them across different days and hours, and do not count a carrier's temporary refusal as an attempt. Compare the share of contacts reached at least once under each cap.
What is the best time of day to make outbound calls?
It depends on your list, so test it. Split the list evenly across a morning, a midday and an evening window. Keep the script and number the same, then compare answer rates per window.
What is the difference between answer rate and completion rate?
Answer rate is answered calls over dialled calls. Completion rate measures the conversation after pickup. Low answer rate points to timing, number or list problems. Low completion points to the opening, length or script.
How do you measure outbound call campaign conversion?
Define one goal event, such as a booked meeting or a "yes" to an offer. Divide it by answered calls, and by dialled calls for a second view. Insight7 Voice, in beta, pulls outcomes from each call's transcript.
Do local phone numbers improve answer rates?
Often, because a familiar area code looks less like a sales call. That is reasoning, not a published benchmark. Confirm it by calling half your list from a local number and half from a national one.
Benchmarks give you a starting range. Your own list, calling hours and script set the real number, so measure each campaign type against its own history. Name the denominator, test the call window, and trust your own baseline over any quoted average.

